BoreSlick HD - Heavy Duty Gun Oil

Many different theories exist today as to the proper way to lubricate and protect

your firearm. The truth is that most of these do have some truth.  The other side

of the argument is that firearms today are basically designed to operate in even

the harshest conditions.  

At Marksman's supply, we have blended a lubricant and protectant that addresses

most of these concerns and provides a multifaceted blanket of protection for your

firearm. We include synthetic components that will reduce abrasive and adhesive

wear rates. Other Ultra Low Molecular Weight (ULMW) components increase

penetration and at the same time decrease surface fatigue and oxidation.

BoreSlick products will completely replenish and recondition a weapon with

lubricants, surfactants and protectants after cleaning.

Red is the ...Color of Victory!

*** Always CHECK and DOUBLE CHECK that your weapon is unloaded before performing ANY cleaning activity ***

*** Always use GLOVES/EYE PROTECTION ***

BoreSlickHD Instructions for Use: 

Step 1 - CLEAN

EXTERIOR

1. Spray BoreNectar on entire surface of all metallic components (NOT on any wooden or plastic, etc).

2. Let sit for 3-5 mins depending fouling.

3. Remove exterior deposits with a nylon bristle brush.

4. Wipe clean with a dry cloth! Use cotton swabs for hard to reach areas. Repeat process as needed.

BORE

1. Spray BoreNectar into bore or swab with a patch soaked with BoreNectar to completely coat the bore.

(Barrel can also be plugged and filled with cleaner).

2. Let sit 3-5 mins depending on amount of fouling.

3. Scrub entire bore 3-5 times with a nylon bore brush.

4. Swab bore with a with a dry patch. A jag or double patching is recommended for complete bore contact.

5. Repeat process until patches come out the same color as an unused, BoreNectar soaked patch (slightly pink in color).

Step 2 - LUBRICATE

1. Apply a small amount of BoreSlick to a patch and swab bore 3-5 times to evenly distribute.

2. Apply a small amount of BoreSlick in and on any moving parts (ie. bolt, trigger, springs, guides, rails, etc.).

3. Reassemble and cycle weapon 2-3 times to evenly distribute.

We believe that: Your Mission … is Our Passion!

Marksman's Supply 

PO Box 7491

Louisville, KY 40257

1 (800) 659-0694

info@marksmanssupply.com