CuNectar - Copper Remover

Red is the Font: Balloon XBD BT

Color of Victory

*** SHAKE WELL FOR 30 SECONDS BEFORE USE *** Font: Arial

*** Always CHECK and DOUBLE CHECK Font: Arial

that your weapon is unloaded before

performing ANY cleaning activity ***

*** Always use GLOVES/EYE PROTECTION ***

*** Use CuNectar ONLY on internal bore surfaces ***

CuNectar Instructions for Use: Font: Arial

Step 1 - CLEAN - CARBON/FOUL REMOVAL

1. Spray Marksman's Supply BoreNectar into bore. For

small diameter bores, swab with a patch soaked with

BoreNectar to completely coat the bore. (Barrel can also

be plugged and filled with cleaner).

2. Let sit 3-5 mins depending on amount of fouling.

3. Scrub entire bore 2-3 times with a nylon bore brush.

4. Swab bore with a dry cloth patch. A jag or double

patching is recommended to allow complete bore contact.

Step 4 - CLEAN - COPPER REMOVAL

1. Spray Marksman's Supply CuNectar into bore. For

small diameter bores, swab with a patch soaked with

CuNectar to completely coat the bore. (barrel can also

be plugged and filled with cleaner).

2. Let stand 3-5 mins depending on amount of fouling.

3. Scrub entire bore 2-3 times with a nylon bore brush.

4. Swab bore with a dry cloth patch. A jag or double

patching is recommended to allow complete bore contact.

Step 3 - REPEAT steps 1 & 2

Repeat process until patches come out the same color as

an unused, BoreNectar soaked patch (slightly pink in color).

Step 4 - LUBRICATE

As you reassemble you weapon, BoreSlick products

completely replenish a weapon with lubricants, surfactants

and penetrants after cleaning,

1. Apply a small amount of BoreSlick to a patch and swab bore

2-3 times to evenly distribute.

2. Apply a small amount of BoreSlick in and on any moving

parts (ie. bolt, trigger, firing pin, springs, guides, rails, etc.).

3. Reassemble and cycle weapon 2-3 times to evenly distribute.

4. Apply thin layer of BoreSlick to all exterior metallic surfaces.

CuNectar Font: Arial

Advanced Font: Arial

Formulation:

Copper Font: Arial

Remover

Your Mission … Font: Arial

... Is Our Passion

4 Fl. Oz. (118 ml) Font: Arial

2 Fl. Oz. (59 ml) Font: Arial

We are all familiar with the difficulty of Font: Arial

removing copper from the barels or our

prized firearms. The primary methods

for removal include chemical (dissolving)

and mechanical (scrubbing). The

difficulty arises from the fact that copper

is a very non-reactive metal. Very few

solvents will dissolve copper in a way

that is also safe to the delicate barrel

lining. Most current products contain

water-based ammonia which always

promotes a vigorous rust and corrosion

process.

Marksman's Supply has engineered an Font: Arial

oil-based alternative that attacks copper

chemically while retarding rust and

corrosion. This solvent also includes a

component that enhances the scrubbing

action and will dramatically increase the

ease with which the copper is removed.

We believe that: Your Mission … Font: Arial

... is Our Passion!

Marksman's Supply Font: Arial

PO Box 7491

Louisville, KY 40257

1 (800) 659-0694

info@marksmanssupply.com